If you are a sleep apnea sufferer and have tried purchasing CPAP machines for your home but they are either too expensive or uncomfortable then the answer may be to look into CPAP reusable filters. These are very similar to those you will find in hospital laboratories, however the technology has been adapted to make them a bit more comfortable for daily use. They are disposable and often washable and come with the hose already attached so all that is required is for you to put the filter in the hose and push the button when you are ready to clean the rest of the mask. In this way the machine becomes a bit more like the real thing, although many CPAP users prefer the simplicity of these cleanable, reusable filters.
CPAP can be cleaned by using any type of mild soap on the humidifier chamber as well as the tubing connected to the humidifier. Once you have completed this then you need to clean off the humidifier chamber and then rinse the mouthpiece and tubing with warm water to remove any soap residue from the cleanser. The humidifier must be completely dried before you store it away. CPAP reusable filters can be reused several times, though if the tubing is used more than 3 times then it is best to be changed altogether. Can I clean CPAP with dishwasher?
Another important point to consider is the fact that the humidifier needs to be completely clean before you clean off the CPAP mask. You can wash off the mask with water or by scrubbing it down with a toothbrush. The first thing you should do when cleaning your CPAP filter is to thoroughly dry the humidifier chamber and then thoroughly dry the CPAP mask itself before removing the CPAP filter from the face mask. Next, you should either cleanse or brush the CPAP mask cushion to remove any soap residue and dirt. If you are cleaning and changing the humidifier then it is advisable that you cleanse the mask before doing this task as the dirt and residue from the cleaning solution can interfere with the effectiveness of the mask. Discover more facts about cleaning at https://en.wikipedia.org/wiki/Cleaning.
The CPAP humidifier itself is fairly easy to clean but there are a couple of steps which are generally ignored but which are necessary. Firstly, you will need to drain the humidifier chamber of all air. If the humidifier has an airflow meter attached then you should turn the humidifier on and watch to see if the air escapes through the small opening in the side of the humidifier chamber. If it does, then this is an indication that you should empty the humidifier chamber. Know Why use distilled water in my cpap here!
Next, you should open the lid of the humidifier chamber but do not remove it until you have completely drained the humidifier chamber of all air. Once you have drained the humidifier chamber you should clean the inside of the tank using distilled water. Never use tap water for this task as it will contain bacteria and impurities. Use distilled water to make sure the water is clean and pure before replacing the lid of the humidifier chamber. Do not clean the dry skin surrounding your nose and mouth with distilled water as it may cause stinging and burning sensations.
Finally, when you have completed all the above tasks you should close the humidifier water chamber and put on the supplied mask. You should test the mask to make sure that it fits properly and that the light shines through. If the mask does not fit properly you should return it to the manufacturer. If the light shines through the mask and the user is happy then the mask is suitable and you will be ready to use the CPAP air cleaners.